Security Labs PTZ IP Camera Spécifications télécharger pdf (Page 13)

Page13of30



• Each stream Bit-rate should be user configurable from 32 to 4096 Kbps

• The IP Camera will have a built in web server, making it accessible for configuration using a

standard Internet browser.

• The IP Camera must be compatible to support advanced analytics software which should be able

to perform the following:

- Intelligent Motion Detection

- Virtual trip wire

- Left item detection

- Theft detection

- Object tracking

- Counter flow detection

• Must have 1 alarm inputs and 1 relay outputs

• The IP Camera must support redundant recording by streaming to multiple recorders at the same

time.

• Should be able to detect motion based on localized area, object size & direction

• It must be possible to reset a unit back to Factory Default configuration without losing IP address

information.

• Video Output PAL/NTSC

- Composite Video

• Serial Data Port supporting RS232/ RS422/ RS485

• Password protected Web interface for administration

• Should have onboard diagnostics facility for serial, Video & Network interface. System logging

shall be possible to a remote IP address, the console port or the unit itself.

• Must support a standard operating temperature range 0 to +50

۫ C with extended temperature

range units available from -10

۫ C to +60 ۫ C

• The system MUST be able to use one particular frame rate and resolution at Day time and

automatically switch to another frame rate/resolution profile when low light conditions occur

• The system MUST allow for Telnet/FTP access into the units and also this access MUST be

configurable, wherein when active access is allowed and when deactivated access MUST not be

allowed.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 29 30

Pas de commentaire

Security Labs PTZ IP Camera Spécifications Page 13